Portable Power Distribution Boxes: PowerHOUSE™

Distributes power to smaller distribution units, environmental control units, portable lights and for expeditionary applications including base camps.

Distributes power to smaller distribution units, environmental control units, portable lights and for expeditionary applications including base camps.

Distributes power to smaller distribution units, environmental control units, portable lights and for expeditionary applications including base camps.

Distributes power to smaller distribution units, environmental control units, portable lights and for expeditionary applications including base camps.

Distributes power to smaller distribution units, environmental control units, portable lights and for expeditionary applications including base camps.

Distributes power to smaller distribution units, environmental control units, portable lights and for expeditionary applications including base camps.

USMC MEPDIS-R 5kW Outdoor Box with Cord Sets and Spare Plugs

USMC MEPDIS-R 5kW Indoor Box with Cord Sets and Spare Plugs

USMC MEPDIS-R "BOO Box" 30kW ECU Power Distribution Box

USMC MEPDIS-R 15kW Distribution Box

USMC MEPDIS-R 30kW Distribution Box

USMC Tactical Water Purification System Box (TWPS)

USMC MEPDIS-R 100kW Distribution Box

USMC MEPDIS-R 300kW Distribution Box

Electrical Feeder System M200 Amp/Phase (A/P): The M200 is a 120/208V,three phase, Electrical Feeder System. It has one (1) three-phase, 200 A/P input circuit with three (3) 100 A/P, four (4) 60 A/P and one (1) 20 A/P output circuits. The system also includes a pigtail and feeder cables.

13229E6350 (System), 13229E6300 (Unit)

Electrical Feeder System M100 Amp/Phase (A/P): The M100 is a 120/208V,three phase, Electrical Feeder System. It has one (1) three-phase, 100 A/P input circuit with one (1) 100A/P feed-through; two (2) 60 A/P, two (2) 40 A/P and two (2) 20 A/P output circuits. The system also includes a pigtail and feeder cables.

13229E6351 (System), 13229E6325 (Unit)

Electrical Distribution System M60 Amp: The M60 is a 120V, single-phase, Electrical Distribution System. It has one (1) 60A input/output circuit with six (6) 20 Amp output circuits. The system includes a pigtail, distribution cables, extension cables, GFCI cables, and household type, duplex receptacle.

13229E6352 (System), 13229E6335 (Unit)

Electrical Distribution System M40 Amp/Phase (A/P): The M40 is a 120/208V, three phase, Electrical Distribution System. It has one (1) three-phase 40 A/P input circuit with one (1) feed-through; and twelve (12) 20 Amp, single-phase output circuits. The system includes a pigtail, distribution cables, extension cables, Ground Fault Circuit Interrupter (GFCI) cables, and household type, duplex receptacle.

13229E6353 (System), 13229E6345 (Unit)

Electrical Utility Assembly M46: The M46 Utility Assembly is similar to wall outlets in a fixed facility. The M46 comes in a transit container that contains branch circuit assembly, cables, lights, GFCI cables and standard household type duplex receptacles for plugging the electrical load. It could be emplaced within tents, shelters or building.

Manual & Automatic Military Grade Transfer Switches are used as a means to safely switch between prime and standby power generation sources in order to provide a secure power supply to crucial loads. The transfer switch allows the user to start up a standby generator when the primary power source is not available or shut down for maintenance.

Tactical generators are sized for peak loads, but average loads are often a fraction of the generator’s rated capacity. This leads to excess fuel consumption and increased generator maintenance. Hybridizing a generator with LexTM3’s ESM allows a battery to efficiently serve low loads. When the battery charge is depleted, the ESM’s smart controls operate the generator at its optimal output to serve the load while re-charging the battery. This reduces fuel consumption and maintenance on the generator, allowing the warfighter to get more fight out of every gallon of fuel.

The Power Management Module enables a single point of connection for management of multiple AC power sources. All outputs are metered and controlled, providing load monitoring and shedding functionalities similar to and compatible with the LCM, enabling optimal generator loading.

The AMMPS Microgrid interface control box

616-5007-0172 Tan, 616-5007-0171 Olive Drab Green

The AMMPS Microgrid main control unit housing most electronics and electrical control.

616-5003-0171 Olive Green, 616-5003-0172 Tan

The Lex Microgrid Kit is designed to automatically start and stop Advanced Medium Mobile Power Sources (AMMPS) generator sets (30kW or 60kW) in pairs of two based on power demand. Connecting (3) Kits together will provide for a Ring Bus Microgrid for up to six generators.

AMMPS Microgrid Kit cuts fuel consumption dramatically while also load balancing between generators for optimum efficiency.